[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Interest, Discussion and R&D on a 18 Slot S100 Backplane & ATX PSU board.
please see the following link for the latest Schematic (in Black and White) and Board Prints. verion: R6
Note: the Schematic is in Black and White i do have a color one but it has same issues as board layers(read on), and the Board prints are looking a little weird, not very sharp. since i updated KiCAD ive had issues printing the board layers where if they were printed all the traces were only one size (small) not accurate to real size atall. so i have to export as SVG and goto pdf from there.. this causes issues. if anyone has a fix for this i would love to know.
also i dont have authority to delete files so if one of the Moderators can delete R4 schematic that would be great!
for those interested in the ATX board(s) i will finish the design(s) and run off a couple boards and test them.. just to make sure they are stable and no-one ends up frying their rig. the ATX PSU board is based on Linear LT1083CP for 15A @ +8V for anyone thats wants to know. The basic ATX voltage distribution board is a fairly simple animal that i have tested already so its almost ready to go :-)