[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [N8VEM-S100:243] Bootstrapping Lunux on the S100/68K...

Hi Mike!  Thanks!  Yes, both serial ports are brought out to connectors on
the S-100 Serial IO board.  Yours should be there soon!

Thanks and have a nice day!

Andrew Lynch

> -----Original Message-----
> From: n8vem...@googlegroups.com [mailto:n8vem...@googlegroups.com] On
> Behalf Of mike
> Sent: Thursday, June 02, 2011 11:15 PM
> To: n8vem...@googlegroups.com
> Subject: Re: [N8VEM-S100:243] Bootstrapping Lunux on the S100/68K...
> Hash: SHA1
> A minor correction:
> Actually I should probably support the N8VEM/S100Computers.com async
> card as I just re-read about it, and it does have an option to bring out
> both of the serial ports (am I correct?). This would be the minimal
> configuration I would be looking for so that you can have one as the
> console, and the other as your TCP/IP (SLIP/PPP) link.
> So, Andrew if you have any serial port boards, I'll take one, or you can
> put me down for one if you don't have any on hand.
> I have an 8-port board ready to go to prototype printing but I don't
> want to get side tracked with that at this stage.
> Kind Regards,
> Mike Sharkey
> On 11-06-02 10:22 PM, mike wrote:
> >    1.2) Hack up a device driver for the Interfacer-4 async card.
> Version: GnuPG v1.4.10 (GNU/Linux)
> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
> G4/58ShnlH3kXVfxHt5/eRCYbWI0PqMaW795dksJNwEbwBmM4Si/XK3Ski1JpgwT
> LJ72pXBzMrAP8TI2zwU663mpj8itBrk+yGEwPiFWCBpMqwh94XOx9Vnyn/mWjcur
> 84s67MSx2Ps0XciNwRKPzOmg2Yv3Ind3PGqjXzrq94TdmSIEMlfSV4pmw2bo5ZUY
> ielC7/K8VnjXqFOpA73CkOcMEN1veJZgIhCGw/Ki09wq6UkvkXx54vV+FKDCD6rk
> FGOSpQTfAP8PhDj5R1Nl6NTwUSsK+9+fQdZF0Meco2wqf62J5Uq5k2jM6i5MaR8=
> =KjTj