[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Bringing up CPM3 for the first time.

Thanks John!  This is fantastic!


The S-100 ZFDC is finishing up its trace routing soon and the updated S-100 IDE board is basically ready to go once it has its final check out.


This is a wonderful instruction set for the hobbyist community to bring up CP/M on their homebrew computer or restored vintage computer!


Excellent work!  I appreciate your continued support and hard work!

Thanks and have a nice day!

Andrew Lynch


From: John Monahan [mailto:mon...@vitasoft.org]
Sent: Saturday, February 26, 2011 3:58 PM
To: n8vem...@googlegroups.com
Cc: Andrew Lynch
Subject: Bringing up CPM3 for the first time.


I am trying to put together a web page explaining for beginners how to install CPM3 on a floppy disk system.  Since  I have been doing this for some time there may be sections that while they seem obvious to me and not for a first timer.  If you have a moment, could you glance over it and if you see something that is unclear let me know.


See:- http://s100computers.com/Software%20Folder/CPM3%20BIOS%20Installation/CPM3%20BIOS%20Software.htm