[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

S100 RAM&ROM Board Parts Source (Coin Cell Holder)

Hi John / Andrew
Please can you advise on the part number and source for the coin cell battery holder as I have searched several UK suppliers (Digikey/Farnell/Rapid)  for CR2032 coin cell holders but datasheets all show the pin spacing at 20.0mm whereas the holes on the RAM&ROM board are 23.0mm apart.
There is one that looks similar on the Jameco website (in the US)  but there is no datasheet to confirm specs
David Fry